TORNATECH JOCKEY PUMP CONTROLLER MANUAL



Tornatech Jockey Pump Controller Manual

Can we feed jockey pump from a tap on the load NFPA. pumps and combined manual and automatic types for engine-driven pumps. Fire pump controllers are intended for installation and use in ordinary locations in accordance with ANSI/NFPA 20, Standard for the Installation of Understanding Fire Pump Controller Applications, Tornatech Model JP3 Jockey Pump Controller for Fire Sprinkler System 480/3/60. $579.00 + Shipping . Up for sale is a TORNATECH VIZI TOUCH Fire Pump Controller. Tested for power on, and response to touch/buttons, no further testing. Deemed for parts and repair due to inability to fully test..

Tornatech datasheets Fire Pump Controllers

FIRE PUMP CATALOG 2019 sffeco.com. The controller manufacturer, prior to shipment, shall hook up and test the jockey pump controller as a completed assembly. This test shall include, but not be restricted to, each function the controller may be required to perform including manual start-stop, automatic start-stop and minimum run timing. The manufacturer shall perform a high, Quality Fire Pump Controller manufacturers & exporter - buy NFPA 70 STANDARD TORNATECH Diesel Engine Fire Pump Controller GFD 24-220 from China manufacturer..

Model JP3 - Jockey Pump Controller 460 Voltage 3 Phase. by Tornatech . Tornatech JP3 jockey pump controllers are both UL and CSA listed and meet IEC industrial control standards. The model JP1 meeta Nema 2 requirements. The model JP jockey pump controller is supplied with the front door mounted, solid state controls with digital iPD+ operator Based in Montreal, Canada since 1985, Tornatech specializes in the conception and manufacturing of fire pump controllers listed by UL and approved by FM and in …

TORNATECH MODEL JP3 Jockey Pump Controller for Fire Sprinkler System 480/3/60 - $758.29. Model JP3 - Jockey Pump Controller460 Voltage 3 Phaseby Tornatech The model JP jockey pump controllers are specifically designed to control jockey pumps in order to maintain the desired water pressure in fire pump serviced systems. A jockey pump installation prevents unnecessary starting of the fire pump Pump Controllers are intended for use with electric with manual reset push-button-CTS Built in Low Suction Pressure Alarm Panel (Includes selectable auto/manual records fire pump system information. When the controller is actuated by the pressure switch, START pushbutton, deluge valve contact, etc.,

The fire pump transfer switch may be either manual or automatic. If located on the line side of the controller as a separate unit, the switch must be rated. A. Section Includes: Horizontal or vertical in-line fire pump, jockey pump, and controls The fire pump controller and built-in automatic transfer switch This component plays a vital role in fire pumps as it controls the entire system. It is selected as per customer choice if any, otherwise it can be either TORNATECH, FIRETROL, HUBBLE LEXINGTON OR JOSLYN CLARKE. Electric Fire Pump Controllers in general are classified by starting method, as full voltage or reduced voltage starting.

Our JPC Jockey Pump Controllers are UL listed, full voltage combination motor controllers with built-in pressure switches. They are designed to automatically start and stop pump-motor assemblies ranging from 1/3 to 7.5 horsepower. They are typically used in fire pump systems. The Fire, Electrical, and Building Safety Resource is the database dedicated to fire protection professionals, helping them find the products & services they need. Tornatech Inc. - Based in Montreal, Canada since 1985, Tornatech specializes in the conception and manufacturing of fire pump controllers in accordance with the NFPA 20 standard, listed with UL and approved by FM.

A microprocessor based jockey pump controller for controlling operation of a jockey pump used to maintain pressure within a fire pump system. The controller includes an electronic circuit board having a microprocessor mounted thereon, and a solid state pressure sensing device for monitoring a … pumps and combined manual and automatic types for engine-driven pumps. Fire pump controllers are intended for installation and use in ordinary locations in accordance with ANSI/NFPA 20, Standard for the Installation of Understanding Fire Pump Controller Applications

Find many great new & used options and get the best deals for Tornatech Model JP3 Jockey Pump Controller for Fire Sprinkler System 230/3/60 at the best online prices at … The model JP jockey pump controllers are specifically designed to control jockey pumps in order to maintain the desired water pressure in fire pump serviced systems. A jockey pump installation prevents unnecessary starting of the fire pump due to small leaks in the sprinkler system piping. The model JP jockey pump controller is supplied with the

Tornatech Jockey Pump Controller with LED Display Model JP3-460/2/3/60 designed for 460V service and up to 2HP Motors. Read PDF Data Sheet FREE Standard Shipping. Please call for expedited shipping options. Read more Pressure Actuated Automatic Controller Automatic Shutdown Charger 1 Float Charger 2 Float Auto. 0. 13.2 PSI 300. System. 80 100. 13.79 V 13.79 V Jockey pump cut-in Live view Jockey pump cut-out Complete service TornaTech Model GPD - Diesel Engine Fire Pump Controllers Author: Steven Brown & Associates, Inc. Subject:

US20100138054A1 Microprocessor based jockey pump. Based in Montreal, Canada since 1985, Tornatech specializes in the conception and manufacturing of fire pump controllers in accordance with the NFPA 20 standard, listed with UL and approved by FM. In addition, we have developed controllers that meet various local standards and approvals such as A2P (France) and LPCB (UK), to name a few.…, A typical Pump Skid Unit configuration is illustrated in Figure 1 and includes the following: Gear Pump and Electric Motor Driver Refer to Table B (For more details, refer to manufactur-er’s data sheet) Fire Pump Controller Tornatech Model GPA or GPA+GPU (For more details, refer to manufactur-er’s data sheet) Control Panel (Optional).

Technical Data Submittal Document

tornatech jockey pump controller manual

FIRE PUMP CATALOG 2019 sffeco.com. Dec 20, 2018 · Welcome to eFirePump.com Hundreds of Products. Everything Fire Pump. With over 30 years of experience eFirePump.com is proud to be the premier supplier of fire pump products in the United States. Located in the Midwest, we can ship quickly to the entire USA, Canada and Mexico. We can also ship to many other countries. eFirePump.com is your one stop source for fire pump parts and …, TORNATECH MODEL JP3 Jockey Pump Controller for Fire Sprinkler System 480/3/60 - $758.29. Model JP3 - Jockey Pump Controller460 Voltage 3 Phaseby Tornatech The model JP jockey pump controllers are specifically designed to control jockey pumps in order to maintain the desired water pressure in fire pump serviced systems. A jockey pump installation prevents unnecessary starting of the fire pump.

Jockey Pump Controller

tornatech jockey pump controller manual

Fire Pump Controllers Schneider Electric. This component plays a vital role in fire pumps as it controls the entire system. It is selected as per customer choice if any, otherwise it can be either TORNATECH, FIRETROL, HUBBLE LEXINGTON OR JOSLYN CLARKE. Electric Fire Pump Controllers in general are classified by starting method, as full voltage or reduced voltage starting. https://en.wikipedia.org/wiki/Jockey_pump The fire pump transfer switch may be either manual or automatic. If located on the line side of the controller as a separate unit, the switch must be rated. A. Section Includes: Horizontal or vertical in-line fire pump, jockey pump, and controls The fire pump controller and built-in automatic transfer switch.

tornatech jockey pump controller manual

  • Jockey Pump Controllers Fire Pump Controllers
  • Jockey Pump Controller

  • Model JP3 Jockey Pump Controller March 2015 2 /LVWLQJ Underwriters Laboratory (UL) UL508A - Industrial Pump Controllers CSA CSA C22.2 No. 14 Industrial Control Equipment New York City Accepted for use in the City of New York by the Department of Buildings Optional CE Mark Various EN, IEC & CEE directives and standards Enclosure 3URWHFWLRQ 5DWLQJ Jockey Pump Fire Pump Controllers. Fire Pump Alarm Panels. See all Fire Pump Controllers. Explore more. The controller is available for 12 or 24 volt negative ground systems, using lead acid or Nickel-Cadmium batteries. Firetrol FTA2000 FTA2000 combined automatic and manual class E2 medium voltage controllers are designed for use with

    For UL Listed and FM Approved Electric Fire Pump Applications . The Tornatech Model OPD electric fire pump disconnecting device provides a UL listed means of disconnecting and consequently isolating the fire pump controller from incoming power and removing the risk of arc flash.It also provides complete overcurrent coordination upstream of the Tornatech Product Manuals. ViziTouch V2 Operator Interface. ViziTouch V1 Operator Interface. GPLV2-Manual-EN.

    Pressure Actuated Automatic Controller Automatic Shutdown Charger 1 Float Charger 2 Float Auto. 0. 13.2 PSI 300. System. 80 100. 13.79 V 13.79 V Jockey pump cut-in Live view Jockey pump cut-out Complete service TornaTech Model GPD - Diesel Engine Fire Pump Controllers Author: Steven Brown & Associates, Inc. Subject: Important Note: The downloads listed on this page are in Adobe PDF format. Click the icon below to download Adobe Reader for free.

    Tornatech Model JP3 Jockey Pump Controller for Fire Sprinkler System 480/3/60. $579.00 + Shipping . Up for sale is a TORNATECH VIZI TOUCH Fire Pump Controller. Tested for power on, and response to touch/buttons, no further testing. Deemed for parts and repair due to inability to fully test. Based in Montreal, Canada since 1985, Tornatech specializes in the conception and manufacturing of fire pump controllers in accordance with the NFPA 20 standard, listed with UL and approved by FM. In addition, we have developed controllers that meet various local standards and approvals such as A2P (France) and LPCB (UK), to name a few.…

    Model JP3 Jockey Pump Controller March 2015 2 /LVWLQJ Underwriters Laboratory (UL) UL508A - Industrial Pump Controllers CSA CSA C22.2 No. 14 Industrial Control Equipment New York City Accepted for use in the City of New York by the Department of Buildings Optional CE Mark Various EN, IEC & CEE directives and standards Enclosure 3URWHFWLRQ 5DWLQJ UL/ FM Tornatech Controller For Fire Fighting Systems . Diesel engine fire pump controllers are designed to automatically start a diesel engine driven fire pump upon detection of a pressure drop in the fire protection system. A diesel engine fire pump controller provides automatic & manual starting and …

    Tornatech (1015). Fire Pump Controllers. Tornatech specializes in the conception and manufacturing of Fire Pump Controllers listed by UL and approved by FM and in accordance with the widely recognized NFPA 20 Standard A microprocessor based jockey pump controller for controlling operation of a jockey pump used to maintain pressure within a fire pump system. The controller includes an electronic circuit board having a microprocessor mounted thereon, and a solid state pressure sensing device for monitoring a …

    Sep 19, 2018 · Set Pressures on Tornatech Jockey Pump Controller. Smooth Pulls Cold Glue and Traditional PDR Glue Pulling Tutorial - Duration: 13:14. Dent Time - San Diego Dent & Bumper Repair Recommended for you Based in Montreal, Canada since 1985, Tornatech specializes in the conception and manufacturing of fire pump controllers listed by UL and approved by FM and in …

    Pump Controllers are intended for use with electric with manual reset push-button-CTS Built in Low Suction Pressure Alarm Panel (Includes selectable auto/manual records fire pump system information. When the controller is actuated by the pressure switch, START pushbutton, deluge valve contact, etc., Tornatech Jockey Pump Controller with LED Display Model JP3-460/2/3/60 designed for 460V service and up to 2HP Motors. Read PDF Data Sheet FREE Standard Shipping. Please call for expedited shipping options. Read more

    tornatech jockey pump controller manual

    Tornatech Product Manuals. ViziTouch V2 Operator Interface. ViziTouch V1 Operator Interface. GPLV2-Manual-EN. Sep 19, 2018 · Set Pressures on Tornatech Jockey Pump Controller. Smooth Pulls Cold Glue and Traditional PDR Glue Pulling Tutorial - Duration: 13:14. Dent Time - San Diego Dent & Bumper Repair Recommended for you

    TornaTech Model GPD Diesel Engine Fire Pump Controllers

    tornatech jockey pump controller manual

    Fire Pump Controllers from Tornatech IFP Magazine. Tornatech Product Manuals. ViziTouch V2 Operator Interface. ViziTouch V1 Operator Interface. GPLV2-Manual-EN., Each pump is tested hydrostatically for not less than 5 minutes. The test pressure is to be upto 2 times the maximum working pressure of the pump, but in no case less than 250 psi (1724 kPa) to ensure no rupture or leakage through the castings at the test pressure. c) IMPELLER BALANCING The impellers of each pump are dynamically balanced to the.

    Technical Data Submittal Document

    PAC Pump Downloads. Jockey Pump Controllers, Standard and Service Entrance Rated. REMOTE ALARM PANELS. Remote Alarm Panels for use with Diesel and Electric Fire Pump Controllers. Only the highest quality components are used throughout our controllers to assure the best possible reliability., Fire Pump Controller options and pricing for Master Control Systems Fire Pump Controllers - Full Size Jockey Control. JPCV - Compact VFD Jockey. JPCE - Compact Jockey Control. SRAP - 1x Supply Alarm Panel. DRAP - 2x Supply Alarm Panel. Industrial Battery Chargers . General Selection Information; MBC6 - Auto Mode Switching. MBC7 - Manual.

    Important Note: The downloads listed on this page are in Adobe PDF format. Click the icon below to download Adobe Reader for free. Tornatech Product Manuals. ViziTouch V2 Operator Interface. ViziTouch V1 Operator Interface. GPLV2-Manual-EN.

    A typical Pump Skid Unit configuration is illustrated in Figure 1 and includes the following: Gear Pump and Electric Motor Driver Refer to Table B (For more details, refer to manufactur-er’s data sheet) Fire Pump Controller Tornatech Model GPA or GPA+GPU (For more details, refer to manufactur-er’s data sheet) Control Panel (Optional) Tornatech Model JP3 Jockey Pump Controller for Fire Sprinkler System 480/3/60. $579.00 + Shipping . Up for sale is a TORNATECH VIZI TOUCH Fire Pump Controller. Tested for power on, and response to touch/buttons, no further testing. Deemed for parts and repair due to inability to fully test.

    Jockey Controller Test Loop Line Fire Pump Controller Jockey Pump Skid Bypass Loop CAUTION: This manual is meant only for lifting of the system. This manual should be kept in a safe place and ALWAYS be available to the QUALIFIED operating and maintenance personnel. Quality Fire Pump Controller manufacturers & exporter - buy NFPA 70 STANDARD TORNATECH Diesel Engine Fire Pump Controller GFD 24-220 from China manufacturer.

    Based in Montreal, Canada since 1985, Tornatech specializes in the conception and manufacturing of fire pump controllers listed by UL and approved by FM and in … UL/ FM Tornatech Controller For Fire Fighting Systems . Diesel engine fire pump controllers are designed to automatically start a diesel engine driven fire pump upon detection of a pressure drop in the fire protection system. A diesel engine fire pump controller provides automatic & manual starting and …

    Pump Controllers are intended for use with electric with manual reset push-button-CTS Built in Low Suction Pressure Alarm Panel (Includes selectable auto/manual records fire pump system information. When the controller is actuated by the pressure switch, START pushbutton, deluge valve contact, etc., Jockey Pump Controllers, Standard and Service Entrance Rated. REMOTE ALARM PANELS. Remote Alarm Panels for use with Diesel and Electric Fire Pump Controllers. Only the highest quality components are used throughout our controllers to assure the best possible reliability.

    FPD MODEL Diesel engine fire pump controller Relay logic based The model FPD fire pump controller for a diesel engine driven fire pump, built to the latest NFPA20 and UL218 Standards provides for: • Manual starting of engine by manual crank push buttons (2) • Automatic starting … pumps and combined manual and automatic types for engine-driven pumps. Fire pump controllers are intended for installation and use in ordinary locations in accordance with ANSI/NFPA 20, Standard for the Installation of Understanding Fire Pump Controller Applications

    Jockey Pump Controller. Full voltage across the line starter Solid State Controls with Digital. Operator Interface. JP. Model. The model JP jockey pump controllers are specifically designed to control jockey pumps in order to . maintain the desired water pressure in fire pump serviced systems. A jockey pump installation prevents Fire Pump Controller options and pricing for Master Control Systems Fire Pump Controllers - Full Size Jockey Control. JPCV - Compact VFD Jockey. JPCE - Compact Jockey Control. SRAP - 1x Supply Alarm Panel. DRAP - 2x Supply Alarm Panel. Industrial Battery Chargers . General Selection Information; MBC6 - Auto Mode Switching. MBC7 - Manual

    Tornatech (1015). Fire Pump Controllers. Tornatech specializes in the conception and manufacturing of Fire Pump Controllers listed by UL and approved by FM and in accordance with the widely recognized NFPA 20 Standard Tornatech (1015). Fire Pump Controllers. Tornatech specializes in the conception and manufacturing of Fire Pump Controllers listed by UL and approved by FM and in accordance with the widely recognized NFPA 20 Standard

    A microprocessor based jockey pump controller for controlling operation of a jockey pump used to maintain pressure within a fire pump system. The controller includes an electronic circuit board having a microprocessor mounted thereon, and a solid state pressure sensing device for monitoring a … The model JP jockey pump controller is supplied with the front door mounted, solid state controls with digital iPD+ operator interface. The iPD+ allows the user to set and adjust all parameters required such as start and stop pressures, ON or OFF timers and units of measure (psi, bar, kPA, feet of head, meter of head) without having to open the controller door.

    Jockey Pump Controller. Full voltage across the line starter Solid State Controls with Digital. Operator Interface. JP. Model. The model JP jockey pump controllers are specifically designed to control jockey pumps in order to . maintain the desired water pressure in fire pump serviced systems. A jockey pump installation prevents Pressure Actuated Automatic Controller Automatic Shutdown Charger 1 Float Charger 2 Float Auto. 0. 13.2 PSI 300. System. 80 100. 13.79 V 13.79 V Jockey pump cut-in Live view Jockey pump cut-out Complete service TornaTech Model GPD - Diesel Engine Fire Pump Controllers Author: Steven Brown & Associates, Inc. Subject:

    Tornatech Jockey Pump Controller with LED Display Model JP3-460/2/3/60 designed for 460V service and up to 2HP Motors. Read PDF Data Sheet FREE Standard Shipping. Please call for expedited shipping options. Read more Model JP3 Jockey Pump Controller March 2015 2 /LVWLQJ Underwriters Laboratory (UL) UL508A - Industrial Pump Controllers CSA CSA C22.2 No. 14 Industrial Control Equipment New York City Accepted for use in the City of New York by the Department of Buildings Optional CE Mark Various EN, IEC & CEE directives and standards Enclosure 3URWHFWLRQ 5DWLQJ

    Our JPC Jockey Pump Controllers are UL listed, full voltage combination motor controllers with built-in pressure switches. They are designed to automatically start and stop pump-motor assemblies ranging from 1/3 to 7.5 horsepower. They are typically used in fire pump systems. Tornatech (1015). Fire Pump Controllers. Tornatech specializes in the conception and manufacturing of Fire Pump Controllers listed by UL and approved by FM and in accordance with the widely recognized NFPA 20 Standard

    World Class Manufacturer of Fire Pump Controllers When there’s a call to start a fire pump in an emergency situation, you need a fire pump controller that you can count on to start every time, without fail – because life safety depends on it. Eaton's fire pump controllers are designed and manufactured in accordance with the strictest fire protection, electrical and insurance codes in the This component plays a vital role in fire pumps as it controls the entire system. It is selected as per customer choice if any, otherwise it can be either TORNATECH, FIRETROL, HUBBLE LEXINGTON OR JOSLYN CLARKE. Electric Fire Pump Controllers in general are classified by starting method, as full voltage or reduced voltage starting.

    TORNATECH MODEL JP3 Jockey Pump Controller for Fire Sprinkler System 230/3/60 - $579.00. Model JP3 - Jockey Pump Controller230 Voltage 3 Phaseby Tornatech The model JP jockey pump controllers are specifically designed to control jockey pumps in order to maintain the desired water pressure in fire pump serviced systems. A jockey pump installation prevents unnecessary starting of the fire pump Based in Montreal, Canada since 1985, Tornatech specializes in the conception and manufacturing of fire pump controllers in accordance with the NFPA 20 standard, listed with UL and approved by FM. In addition, we have developed controllers that meet various local standards and approvals such as A2P (France) and LPCB (UK), to name a few.…

    Pressure Actuated Automatic Controller Automatic Shutdown Charger 1 Float Charger 2 Float Auto. 0. 13.2 PSI 300. System. 80 100. 13.79 V 13.79 V Jockey pump cut-in Live view Jockey pump cut-out Complete service TornaTech Model GPD - Diesel Engine Fire Pump Controllers Author: Steven Brown & Associates, Inc. Subject: Tornatech Jockey Pump Controller with LED Display Model JP3-208/2/3/60 designed for 208V service and up to 2HP Motors. Read PDF Data Sheet FREE Standard Shipping. Please call for expedited shipping options. Read more

    Our JPC Jockey Pump Controllers are UL listed, full voltage combination motor controllers with built-in pressure switches. They are designed to automatically start and stop pump-motor assemblies ranging from 1/3 to 7.5 horsepower. They are typically used in fire pump systems. Pressure Actuated Automatic Controller Automatic Shutdown Charger 1 Float Charger 2 Float Auto. 0. 13.2 PSI 300. System. 80 100. 13.79 V 13.79 V Jockey pump cut-in Live view Jockey pump cut-out Complete service TornaTech Model GPD - Diesel Engine Fire Pump Controllers Author: Steven Brown & Associates, Inc. Subject:

    UL/ FM Tornatech Controller For Fire Fighting Systems . Diesel engine fire pump controllers are designed to automatically start a diesel engine driven fire pump upon detection of a pressure drop in the fire protection system. A diesel engine fire pump controller provides automatic & manual starting and … UL/ FM Tornatech Controller For Fire Fighting Systems . Diesel engine fire pump controllers are designed to automatically start a diesel engine driven fire pump upon detection of a pressure drop in the fire protection system. A diesel engine fire pump controller provides automatic & manual starting and …

    Fire Pump Controller Options and Pricing

    tornatech jockey pump controller manual

    Fire Pump Controller Options and Pricing. Our JPC Jockey Pump Controllers are UL listed, full voltage combination motor controllers with built-in pressure switches. They are designed to automatically start and stop pump-motor assemblies ranging from 1/3 to 7.5 horsepower. They are typically used in fire pump systems., Fire Pump Controller options and pricing for Master Control Systems Fire Pump Controllers - Full Size Jockey Control. JPCV - Compact VFD Jockey. JPCE - Compact Jockey Control. SRAP - 1x Supply Alarm Panel. DRAP - 2x Supply Alarm Panel. Industrial Battery Chargers . General Selection Information; MBC6 - Auto Mode Switching. MBC7 - Manual.

    tornatech jockey pump controller manual

    Jockey Pump Controller. Aline Pumps has recently partnered with Tornatech Control Panels to provide AS2941 compliant Fire Pumps and controls to Fire Protection Contractors , Builders and developers. Our electric and diesel fire pump controllers feature the ViZiTouch color touch screen operator interface, IP55 enclosure with a 4.2” color display with intuitive graphics, quick and easy commissioning, user-friendly, The model JP jockey pump controller is supplied with the front door mounted, solid state controls with digital iPD+ operator interface. The iPD+ allows the user to set and adjust all parameters required such as start and stop pressures, ON or OFF timers and units of measure (psi, bar, kPA, feet of head, meter of head) without having to open the controller door..

    Fire Pump Controllers from Tornatech IFP Magazine

    tornatech jockey pump controller manual

    AQUAMIST i onto ente MCC) Pum ki Unit. FPD MODEL Diesel engine fire pump controller Relay logic based The model FPD fire pump controller for a diesel engine driven fire pump, built to the latest NFPA20 and UL218 Standards provides for: • Manual starting of engine by manual crank push buttons (2) • Automatic starting … https://en.wikipedia.org/wiki/Jockey_pump Tornatech Model JP3 Jockey Pump Controller for Fire Sprinkler System 480/3/60. $579.00 + Shipping . Up for sale is a TORNATECH VIZI TOUCH Fire Pump Controller. Tested for power on, and response to touch/buttons, no further testing. Deemed for parts and repair due to inability to fully test..

    tornatech jockey pump controller manual


    Jockey Controller Test Loop Line Fire Pump Controller Jockey Pump Skid Bypass Loop CAUTION: This manual is meant only for lifting of the system. This manual should be kept in a safe place and ALWAYS be available to the QUALIFIED operating and maintenance personnel. World Class Manufacturer of Fire Pump Controllers When there’s a call to start a fire pump in an emergency situation, you need a fire pump controller that you can count on to start every time, without fail – because life safety depends on it. Eaton's fire pump controllers are designed and manufactured in accordance with the strictest fire protection, electrical and insurance codes in the

    Model JP3 Jockey Pump Controller March 2015 2 /LVWLQJ Underwriters Laboratory (UL) UL508A - Industrial Pump Controllers CSA CSA C22.2 No. 14 Industrial Control Equipment New York City Accepted for use in the City of New York by the Department of Buildings Optional CE Mark Various EN, IEC & CEE directives and standards Enclosure 3URWHFWLRQ 5DWLQJ The model JP jockey pump controllers are specifically designed to control jockey pumps in order to maintain the desired water pressure in fire pump serviced systems. A jockey pump installation prevents unnecessary starting of the fire pump due to small leaks in the sprinkler system piping. The model JP jockey pump controller is supplied with the

    Tornatech Jockey Pump Controller with LED Display Model JP3-208/2/3/60 designed for 208V service and up to 2HP Motors. Read PDF Data Sheet FREE Standard Shipping. Please call for expedited shipping options. Read more FPD MODEL Diesel engine fire pump controller Relay logic based The model FPD fire pump controller for a diesel engine driven fire pump, built to the latest NFPA20 and UL218 Standards provides for: • Manual starting of engine by manual crank push buttons (2) • Automatic starting …

    Based in Montreal, Canada since 1985, Tornatech specializes in the conception and manufacturing of fire pump controllers in accordance with the NFPA 20 standard, listed with UL and approved by FM. In addition, we have developed controllers that meet various local standards and approvals such as A2P (France) and LPCB (UK), to name a few.… Important Note: The downloads listed on this page are in Adobe PDF format. Click the icon below to download Adobe Reader for free.

    Dec 20, 2018 · Step by step guide on how to calibrate a transducer on a Tornatech jockey pump controller (Model JP) Step by step guide on how to calibrate a transducer on a Tornatech jockey pump controller Model JP3 Jockey Pump Controller March 2015 2 /LVWLQJ Underwriters Laboratory (UL) UL508A - Industrial Pump Controllers CSA CSA C22.2 No. 14 Industrial Control Equipment New York City Accepted for use in the City of New York by the Department of Buildings Optional CE Mark Various EN, IEC & CEE directives and standards Enclosure 3URWHFWLRQ 5DWLQJ

    Pressure Actuated Automatic Controller Automatic Shutdown Charger 1 Float Charger 2 Float Auto. 0. 13.2 PSI 300. System. 80 100. 13.79 V 13.79 V Jockey pump cut-in Live view Jockey pump cut-out Complete service TornaTech Model GPD - Diesel Engine Fire Pump Controllers Author: Steven Brown & Associates, Inc. Subject: Pressure Actuated Automatic Controller Automatic Shutdown Charger 1 Float Charger 2 Float Auto. 0. 13.2 PSI 300. System. 80 100. 13.79 V 13.79 V Jockey pump cut-in Live view Jockey pump cut-out Complete service TornaTech Model GPD - Diesel Engine Fire Pump Controllers Author: Steven Brown & Associates, Inc. Subject:

    Manual Transfer Switches. Custom Transfer Switches. See all Transfer Switches. Jockey Pump Fire Pump Controllers. Fire Pump Alarm Panels. See all Fire Pump Controllers. Explore more. Download Center. Firetrol FTA1930 Electric fire pump controller - digital solid state starting TORNATECH MODEL JP3 Jockey Pump Controller for Fire Sprinkler System 230/3/60 - $579.00. Model JP3 - Jockey Pump Controller230 Voltage 3 Phaseby Tornatech The model JP jockey pump controllers are specifically designed to control jockey pumps in order to maintain the desired water pressure in fire pump serviced systems. A jockey pump installation prevents unnecessary starting of the fire pump

    The model JP jockey pump controller is supplied with the front door mounted, solid state controls with digital iPD+ operator interface. The iPD+ allows the user to set and adjust all parameters required such as start and stop pressures, ON or OFF timers and units of measure (psi, bar, kPA, feet of head, meter of head) without having to open the controller door. For UL Listed and FM Approved Electric Fire Pump Applications . The Tornatech Model OPD electric fire pump disconnecting device provides a UL listed means of disconnecting and consequently isolating the fire pump controller from incoming power and removing the risk of arc flash.It also provides complete overcurrent coordination upstream of the

    Pressure Actuated Automatic Controller Automatic Shutdown Charger 1 Float Charger 2 Float Auto. 0. 13.2 PSI 300. System. 80 100. 13.79 V 13.79 V Jockey pump cut-in Live view Jockey pump cut-out Complete service TornaTech Model GPD - Diesel Engine Fire Pump Controllers Author: Steven Brown & Associates, Inc. Subject: Find many great new & used options and get the best deals for Tornatech Model JP3 Jockey Pump Controller for Fire Sprinkler System 230/3/60 at the best online prices at …

    For UL Listed and FM Approved Electric Fire Pump Applications . The Tornatech Model OPD electric fire pump disconnecting device provides a UL listed means of disconnecting and consequently isolating the fire pump controller from incoming power and removing the risk of arc flash.It also provides complete overcurrent coordination upstream of the Important Note: The downloads listed on this page are in Adobe PDF format. Click the icon below to download Adobe Reader for free.

    For UL Listed and FM Approved Electric Fire Pump Applications . The Tornatech Model OPD electric fire pump disconnecting device provides a UL listed means of disconnecting and consequently isolating the fire pump controller from incoming power and removing the risk of arc flash.It also provides complete overcurrent coordination upstream of the Pressure Actuated Automatic Controller Automatic Shutdown Charger 1 Float Charger 2 Float Auto. 0. 13.2 PSI 300. System. 80 100. 13.79 V 13.79 V Jockey pump cut-in Live view Jockey pump cut-out Complete service TornaTech Model GPD - Diesel Engine Fire Pump Controllers Author: Steven Brown & Associates, Inc. Subject:

    GPD-SBRO-002/E Rev.11 August 2015 Printed in Canada. Standard Features •iZiTouch operator interfaceV • 2 assemblyNEMA • Pressure and event recorder • Battery voltage and amperage display Based in Montreal, Canada since 1985, Tornatech specializes in the conception and manufacturing of fire pump controllers in accordance with the NFPA 20 standard, listed with UL and approved by FM. In addition, we have developed controllers that meet various local standards and approvals such as A2P (France) and LPCB (UK), to name a few.…

    Oct 15, 2016 · We have a fire pump with controller and ATS as an integrated unit. We are looking to feed the jockey pump from load side of the ATS but NEC Section 695.6(E) says that FP controller and ATS shall serve no other load other than fire pump. We are not looking to feed any other load except jockey pump which is associated with that fire pump. Sep 19, 2018 · Set Pressures on Tornatech Jockey Pump Controller. Smooth Pulls Cold Glue and Traditional PDR Glue Pulling Tutorial - Duration: 13:14. Dent Time - San Diego Dent & Bumper Repair Recommended for you

    Aline Pumps has recently partnered with Tornatech Control Panels to provide AS2941 compliant Fire Pumps and controls to Fire Protection Contractors , Builders and developers. Our electric and diesel fire pump controllers feature the ViZiTouch color touch screen operator interface, IP55 enclosure with a 4.2” color display with intuitive graphics, quick and easy commissioning, user-friendly Model JP3 - Jockey Pump Controller 460 Voltage 3 Phase. by Tornatech . Tornatech JP3 jockey pump controllers are both UL and CSA listed and meet IEC industrial control standards. The model JP1 meeta Nema 2 requirements. The model JP jockey pump controller is supplied with the front door mounted, solid state controls with digital iPD+ operator

    Our JPC Jockey Pump Controllers are UL listed, full voltage combination motor controllers with built-in pressure switches. They are designed to automatically start and stop pump-motor assemblies ranging from 1/3 to 7.5 horsepower. They are typically used in fire pump systems. Dec 20, 2018 · Step by step guide on how to calibrate a transducer on a Tornatech jockey pump controller (Model JP) Step by step guide on how to calibrate a transducer on a Tornatech jockey pump controller

    For UL Listed and FM Approved Electric Fire Pump Applications . The Tornatech Model OPD electric fire pump disconnecting device provides a UL listed means of disconnecting and consequently isolating the fire pump controller from incoming power and removing the risk of arc flash.It also provides complete overcurrent coordination upstream of the Pump Controllers are intended for use with electric with manual reset push-button-CTS Built in Low Suction Pressure Alarm Panel (Includes selectable auto/manual records fire pump system information. When the controller is actuated by the pressure switch, START pushbutton, deluge valve contact, etc.,

    Pressure Actuated Automatic Controller Automatic Shutdown Charger 1 Float Charger 2 Float Auto. 0. 13.2 PSI 300. System. 80 100. 13.79 V 13.79 V Jockey pump cut-in Live view Jockey pump cut-out Complete service TornaTech Model GPD - Diesel Engine Fire Pump Controllers Author: Steven Brown & Associates, Inc. Subject: Pump Controllers are intended for use with electric with manual reset push-button-CTS Built in Low Suction Pressure Alarm Panel (Includes selectable auto/manual records fire pump system information. When the controller is actuated by the pressure switch, START pushbutton, deluge valve contact, etc.,